ADDERLink INFINITY dual 2112T
AdderLink INFINITY dual VNC a high performance KVM server that can be accessed remotely via IP with a VNC viewer and / or simultaneously with an AdderLink Infinity receiver.
Its base feature set is the same as the AdderLink Infinity dual with the addition of:
Dual Link DVI - Dual Head DVI - Dual IP Carrier Type (copper & fiber)
Fully compatible with the ADDERLink INFINITY Matrix range.
View and access your computers remotely, out of band without the need to install software.
The VNC server can be accessed by a standard web browser but for superior graphical performance,a Real VNC viewer should be used . Free of the limitations of HTTPS, Real VNC greatly enhances video performance. The unit serves pixel perfect video up to 24 bits per colour at a maximum of 2560x1600 or two at 1920x1200. RFP3.3 is supported for open source viewers.
The unit can simultaneously serve a VNC equipped video wall processor and an AdderLink Infinity equipped user station reducing the complexity of control room infrastructure.
Employing enterprise grade security (using AES 256 bit encryption and RSA 2048 bit public key authentication) as standard, the unit is further enhanced by the use of Real VNC that allows for the creation of ciphered user communications.
To transfer files from remote users to controlled computers, system has been engineered to act as a conduit through which data can be passed. Files can be transferred via IP onto the AdderLink Infinity dual and onto the target computer by means of a USB virtual media port.
The unit has an RS232 port to allow communication to devices like power switches, allowing remote re-booting of the target computer.
On the VNC server, you can create up to 16 user profiles with defined access rights. The unit can be accessed by up to 16 users at any one time.
By the addition of AdderLink Infinity management system (A.I.M.) you can turn multiple point to point extenders into a matrix system that allows any workstation to connect to any computer connected to the network. See the A.I.M. data sheet for details.
All computers with DVI-D, USB, Audio, RS232 - requirement dependent
The system supports either two single link DVI resolutions to a maximum of 1920 x 1200@ 60Hz or a single Dual link to a maximum of 2560 x 1600@ 60Hz
Supports USB2.0 devices (Low, full and high speed). The system has a security feature which allows the blocking of non HID devices. Isochronous devices are not supported (i.e. USB audio or video devices)
The system delivers analogue stereo audio (Line in, Line Out) digitally across the network.
RS232 can be passed between the units to a maximum baud rate 115K2. RS232 is reserved for power control for AdderLink Infinity Dual VNC
All known operating systems (except Sun BIOS access)
2 x DVI-D x 1, Audio 3.5mm in, Audio 3.5mm out, USB type B, and RS232 9 pin D-Type
1 x 8p8c for VNC access
1 x 8p8c and 1 x SFP cage for AdderLink Infinity Network
1U compact case, robust metal construction. 198mm/7.92” (w), 44mm/1.76” (h), 150mm/6.0” (d), 1.1kg/2.7lbs.
2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.8A, input to power adapter, 5VDC 20.0W output from power adapter
0 to 40ºC / 32 to 104ºF
SFP-MM-LC : Multimode fibre optic module with LC connectors for up to 500 Meters
SFP-SM-LC : Single mode fibre optic module with LC connectors for up to 10Km
SFP-CATx- RJ45: SFP to CATx converter module
RMK-4S: 1 unit per 1U 19 inch
RMK-4D: 2 units per 1U 19 inch
RMK-4V: VESA mount, can also be used to secure to walls/surfaces