ADDERLink X-DVI PRO-MS

The ADDERLink X-DVI PRO-MS Dual Head extender distributes uncompressed digital video with audio over twin cables to multiple screens up to 50m away, with USB 2.0 connection to interface with a range of devices

ADDERLink X-DVI PRO MS

Overview

Part of the ADDERLink® X-DVI PRO range, the high-performance X-DVI PRO-MS digital KVM (Keyboard, Video and Mouse) and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment. Uncompressed digital video and audio is distributed in real-time and with zero latency to multiple screens, allowing the user to maintain an at-the-PC experience.  The USB 2.0 interface ensures compatibility with a wide range of USB devices. It can transmit two Single Link DVI video streams, USB 2.0 and analog audio up to 50m over a twin CATx cables to multiple screens.

  • Delivers uncompressed digital video with audio
  • USB 2.0 Low and Full speed connection: to interface with a range of devices
  • Exact content seen on the local monitor is distributed: up to 50m over a twin CATx cable
  • Energy efficient design: external power supplies are not needed 
  • X-DVIPRO-MS: enables dual screens at 1920 x 1200 @ 60Hz maximum resolution
Product codes
X-DVIPRO-MS2
ADDERLink X-DVI PRO MS

Product Features

  • Pixel perfect digital video with real time control: using uncompressed video extension; no visible artefacts or latency are introduced allowing you to be certain of quality and control
  • Distribution up to 50m over two CATx cables: video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50m of extension (distance dependent upon video resolution, CATx cable type, and number of connection intervals)
  • Connect any USB interface device: utilising a unique method of USB communication, the ADDERLink X-DVIPRO extenders deliver the highest possible levels of USB compatibility. All USB 1.1 and 2.0 low/full speed devices are supported.
  • HDMI video and audio extension capabilities: Digital audio for 8 channels of HDMI audio, supported simultaneously to analog audio
  • Stereo analog audio: Stereo channel 16bit sampled at 44.1kHz to transfer audio from local to remote for line out
  • Power efficiency: transmitter unit can be powered solely from the host computer’s USB connection
  • EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the date coming from the source monitor
  • Plug and Play: ADDERLink X-DVI PRO extenders are delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software
  • Robust yet lightweight: small form factor, rack mountable device

Specification

Audio

The system delivers analog stereo audio (Line Out), 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio)

Approvals / Compliance

  • CE
  • FCC

Standards

  • DVI-D Interface – digital only the system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
  • Hardware compatibility: All computers with DVI-D, USB and audio - requirement dependent
  • Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50m. (Reduce maximum cable length by 5m if a USB hub is connected to the receiver unit)

Cable Guidelines
Recommended cables are CAT7 shielded foiled twisted pairs:

  • Daetwyler 7702  Flexible patch cable
  • Daetwyler 7120  Bulk cable

CAT5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5m. Preferably patch cables should be of type  CAT7a and less than 2m. Patch cables over 2m must be CAT7a. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.  CAT5e is not recommended for use with this system

Standard Resolution Frequency Cable Distance
TVHD 1920 x 1080 60 Hz CAT7a 60 meters
UXGA 1600 x 1200 60 Hz CAT7a 60 meters
WUXGA 1920 x 1200 60 Hz CAT7a 60 meters
TVHD 1920 x 1080 60 Hz CAT6a 55 meters
TVHD 1920 x 1080 60 Hz CAT5e 45 meters
SXGA 1280 x 1024 60 Hz CAT7a 70 meters
SXGA 1280 x 1080 60 Hz CAT6a 65 meters
SXGA 1280 x 1080 60 Hz CAT5e 55 meters

Environmental

Operating Temperature: 0 to 40ºC / 32 to 104ºF

Connectors – Local Unit

Computer connections Transmitter (TX)

2 x DVI-D, audio 3.5mm in, USB type B

Connectors – Remote Unit

Computer connections Receiver (RX)

2 x DVI-D, audio 3.5mm out, USB type A x 4

Mechanical

Compact case, robust metal construction

120mm / 4.7’’ (w) x 75mm / 3’’(d) x 48mm / 2’’ (h)

500g / 1.1 lb

Power

Rx: 2.5mm DC jack (power adapter included),100-240V AC 50/60Hz, 0.4A, input to power adapter, 5V DC 12.5W output from power adapter. TX: Powered from two USB connections. Optional 2.5mm DC jack (power adapter not included)

Software

Compatible with all known operating systems

Associated products

ADDERLink® X-DVI PRO-DL

Part of the ADDERLink® X-DVI PRO range, the X-DVI PRO-DL high-performance, digital KVM (Keyboard, Video and Mouse) and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment.

ADDERLink X-DVI PRO

Part of the ADDERLink® X-DVI PRO range, the high performance X-DVI PRO digital video and USB extender enables you to locate your critical computing hardware in a secure and temperat

ADDERLink® X-USB PRO

Adder’s next generation USB, video and audio extender, distributing uncompressed data to deliver sharp, bright, high resolution video images and high quality audio to single user consoles up to 300m/1000ft over a single CATx cable.

The ADDERLink™ X-USB PRO has been designed to provide industry-leading video clarity, compatibility and high rack densities.

ADDERLink X50

ADDERLink® X50 is compact in size and delivers uncompressed, lossless extension of USB peripherals including Keyboards, Video and Mice (KVM) up to 50m (150ft) over a single CAT5 or higher UTP cable.

Product Gallery

Downloads

Product manual
Where to buy

Adder products are purchasable through our key technology partners. You can find a partners on our where to buy page.

Where to buy
Ordering information

X-DVIPRO-MS2-XX

XX = Mains Lead Country Code:
UK  = United Kingdom
US  = United States
EURO  = Europe
AUS  = Australia

Contact

Are you interested in this product and would like to find out more?

Our team of KVM experts are on hand to help guide you through our extensive range of products, understand how Adder can help your KVM requirements and of course anwser any queries you may have.

Use this form to enquire about Adder's products and services. One of our IP KVM experts will be in touch with you as soon as possible.

If you need technical support, please click here instead